A basic engine monitor for the Viking engine with applicable sensors and ready to go.

Pre-wired and ready to install/use engine monitor. This engine monitor is specific to the Viking Engine lineup. At this time, the non-turbo models are supported with a future announcement for when the turbo engines will be included. The box includes the sunlight readable instrument, all wires terminated to a terminal strip, as well as wires from the terminal strip to the individual probes. The four probes are:

• Gearbox Temperature

• Coolant Temperature

• Fuel Pressure

• Oil Pressure

The instrument also displays RPM and voltage and has a bright external warning light already wired in.

Usually when purchasing an engine monitor you would normally receive a box with a gauge, some wiring pins and a thick manual. The Viking View works right out of the box. Use a small battery and a 1 AMP fuse to power it up. Everything immediately works, all you have to do is transfer everything in the box to the instrument panel and engine.

All parameters are pre-set for you and your engine model.

Please see our technical video under EIS/Sensor locations for your applicable engine

Sensor Locations, EIS & Viking View — Viking Aircraft Engines